1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
# Install Debian on a bare metal system with v-i
You need:
- a USB drive, at least 4 GB
- a PC that supports UEFI
- backups: _all drives_ in the PC will be wiped from data
The steps:
1. Download the installer image (`v-i.img.xz`) and related scripts
(`configure-installer` and `write-and-config.sh`) from a
subdirectory or <https://files.liw.fi/v-i/>.
* <https://files.liw.fi/v-i/VERSION/v-i.img.xz>
* <https://files.liw.fi/v-i/VERSION/configure-installer>
* <https://files.liw.fi/v-i/VERSION/write-and-config.sh>
2. Unpack the downloaded image.
~~~sh
unxz v-i.img.xz
~~~
This will use a few gigabytes of disk apace.
3. Write a configuration file for the installer, to allow logging in
via SSH to the running installer. If you don't intend to do that,
you can just create an empty file. Otherwise, create a YAML file
like the one below, but with values customized for you. You need
one of `authorized_keys_file` or `user_ca_pub_file`.
~~~yaml
user_ca_pub_file: ~liw/.ssh/ca/userca.pub
authorized_keys_file: ~liw/.ssh/id_personal.pub
~~~
Either of these two lines configures the installer SSH to allow you
to log in as `root` using SSH. Password logins are not allowed for
SSH. You can also log in via the console, as `root`, without a
password.
The installer configuration file can specify a wifi access point to
connect to, if you need that.
~~~yaml
wifi_name: DadItIsThisOne
wifi_password: hunter2
~~~
4. Insert USB drive and find out the device allocated it. I prefer GNOME
Disks for this, but you can also look up the device of the USB
stick: run `sudo dmsg -T`. The device name is usually `/dev/sdx`
for some value of x.
5. Write the installer image to the USB drive, and configure it.
~~~sh
sudo bash write-and-config.sh config.yaml /dev/sdx v-i.img
~~~
This will take a few minutes.
6. Make sure everything has been written to the USB drive. Again, I
prefer GNOME Disks for this, but from the command line:
~~~sh
udisksctl power-off -b /dev/sdx
~~~
7. Move the USB drive to the target machine and boot off the drive.
How this happens varies from machine to machine. On my Thinkpad
X220, I press F12 at the POST screen and then choose the right
drive from the boot menu.
8. Wait for the system to boot. Log in as root, either from the
virtual console (no password), or via SSH.
If you need to connect to wifi, you need to log in as root and run
the following commands:
~~~sh
iwctl station wlan0 get-networks
iwctl station wlan0 connect DadItIsThisOne
~~~
Substitute the name of the network as needed. Enter wifi password
when requested.
9. Create a target specification file `foo-target.yaml`. The name can
be anything, but it must be valid YAML. In the example below, there
is one NVMe drive that will get the system installed. All drives
will be encrypted using LUKS, with the password "hunter2".
~~~yaml
hostname: x220
drive: /dev/nvme0n1
luks: hunter2
ansible_vars:
user_pub: |
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPQe6lsTapAxiwhhEeE/ixuK+5N8esCsMWoekQqjtxjP
~~~
The SSH public key will be added to the root user's
`authorized_keys` file. See [spec.md][] for a full description of
the target specification file.
10. Install. Add the `--verbose` option to `./v-i` if you want to know
what's happening. The first time you run this on a given v-i USB
drive, it takes a while: it runs `vmdebootstrap` and that is just
slow. However, the output is cached, so further runs are faster.
~~~sh
rm -f install.log
v-i --verbose foo-target.yaml
~~~
This will take few minutes the first time, assuming a fast
Internet connection. Further runs go faster.
11. Reboot into the installed system.
12. Finish configuring the system in whatever way you like to do that.
I use Ansible.
Remember to change the LUKS password for each drive.
13. Optional: Let me know how it went.
[spec.md]: spec.html
|